BTPQZ - BROMOTHYMOL BLUE, D470
- MSDS: BTPQZ
- Manufacturer: J T BAKER INC
- Product Name: BROMOTHYMOL BLUE, D470
- National Stock Number: 6810-00N045247
Product Identification
Product ID:BROMOTHYMOL BLUE, D470
MSDS Date:03/09/1992
FSC:6810
NIIN:00N045247
MSDS Number: BTPQZ
Responsible Party
PHILLIPSBURG, NJ 08865
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
PHENOL, 4,4'-(3H-2,1-BENZOXATHIOL-3-YLDIENE)BIS
CAS: 76-59-5
RTECS: SJ7450000
Fraction By Weight: 90-100%
OSHA PEL N/K
ACGIH TLV: N/K
0@21C
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/SKIN/SKIN ABSORP/EYE:
NONE IDENTIFIED. INGEST: NONE IDENTIFIED. CHRONIC: NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: IF SWALLOWED & PERSON IS CONSCIOUS, IMMED GIVE LG
AMTS OF WATER. GET MED ATTN. INHAL: MOVE TO FRESH AIR. SKIN: IMMED
WASH WITH PLENTY OF SOAP AND WATER FOR AT LEAST 15 MINUTES. EYE:
IMMED FLUS H WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA. AVOID CONTACT
W/EYES/SKIN/CLTHG. MAY INTERACT W/OTHER SUBSTANCES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:VENT HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORK GOGGLES .
Other Protective Equipment:LAB COAT. THIS IS LAB-USE PROD FOR WHICH NO
INDUST PROT EQUIP HAS BEEN DESIGNATED. DPNDG ON USE, PROT CLTHG
(SUPP DATA)
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
OTHER PROT EQUIP: SHOULD BE WORN.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:392F,200C
Solubility in Water:NEGLIGIBLE(<0.1%)
Appearance and Odor:PINK TO PURPLE POWDER
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE DOCUMENTED.
Hazardous Decomposition Products:OXIDES OF SULFUR, HYDROGEN BROMIDE,
CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE, AND
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.